Datamax S-Class SV-3210 Manual de usuario descargar pdf (Pagina 43)

ST/SV-3210 and ST/SV-3306 33

4.4.2 Cleaning the Platen Roller

Print quality can decline if the platen roller becomes contaminated with

paper dust, grit or adhesive. When this build-up is not removed, it can

cause abrasive damage to the printhead. To clean the Platen Roller:

n Turn ‘Off’ and unplug the printer.

o ST Models: Raise the access cover; see Section 3.2.

p Slide the printhead latch to the unlocked position, raise the Printhead

Assembly (see Section 4.4.1) and remove the ticket stock.

q Using a cotton swab or lint-free cloth moistened with isopropyl

alcohol, remove all debris from the Platen Roller. Manually rotate

the roller and repeat to clean the entire surface.

r Allow the Platen Roller to dry, then lower the Printhead Assembly

and slide the printhead latch into the locked position.

s Plug in and turn ‘On’

the printer.

t Load ticket stock;

see Section 3.2.

u ST Models: Close the

access cover.

; Note: NEVER use a sharp object to clean the Platen Roller.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Sin comentarios

Datamax S-Class SV-3210 Manual de usuario Pagina 43