Datamax H-4606X Manual del operador descargar pdf (Pagina 158)

148 H-Class

Configuration Using IP Discovery

DHCP, BootP, and RARP are services that provide a method for assigning and maintaining IP

Addresses. With IP Discovery enabled, the Print Server obtains IP information from this

service. IP Discovery must first be enabled for use. Assign IP Discovery by following the

steps below:

;

When IP DISCOVERY is ENABLED you will not be able to change the IP ADDRESS,

SUBNET MASK, or GATEWAY.

A. Without connecting the Ethernet cable, turn ON the printer. Press the MENU Button.

B. Scroll to COMMUNICATIONS > NIC ADAPTER > IP DISCOVERY. Select ENABLED and

press ENTER.

C. Press EXIT and save your changes when prompted.

D. Turn OFF the printer. Connect the Ethernet cable and turn ON the printer.

E. After the connection is established, obtain the Assigned IP Address (see below) by

printing a Configuration Label.

;

Depending upon your server, you may have to wait a minute or two for the

Assigned IP Address to appear on the Configuration Label.

F. After the Assigned IP Address has been obtained, install the port and printer driver using

the Windows



‘Add a Printer Wizard’ and Driver and Port Setup (see Appendix H).

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 185 186

Sin comentarios

Datamax H-4606X Manual del operador Pagina 158