Datamax H-4606X Manual del operador descargar pdf (Pagina 58)

48 H-Class

Printer Options (continued)

Menu Item Details

GPIO PORT

Controls the optional Applicator Interface Card’s GPIO

function, where:

GPIO DEVICE

Sets the option to work with a specific device type,

where:

DISABLED

Disables the option.

APPLICATOR

Enables the following GPIO parameters for label

applicator functions:

• De-asserts Data Ready (DRDY) when the last label

starts printing to indicate completion;

• FEED allowed at any time; and,

• Does not de-assert DRDY upon PAUSE.

APPLICATOR 2

Enables the following GPIO parameters for label

applicator functions:

• Data Ready (DRDY) overlaps End of Print (EOP)

signal by about 1 msec. to indicate completion;

• DRDY signal end inhibits FEED; and,

• De-asserts DRDY upon PAUSE or FAULT.

BARCODE VERIFIER

Enables the GPIO Port to work with a bar code verifier.

START OF PRINT

Selects the type of input signal required to initiate

Start of Print (SOP), where:

LOW PULSE

Triggers printing with a low pulse.

HIGH PULSE

Triggers printing with a high pulse.

ACTIVE LOW

Triggers printing with a low signal.

ACTIVE HIGH

Triggers printing with a high signal.

EDGE

Triggers printing with a signal edge transition.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 185 186

Sin comentarios

Datamax H-4606X Manual del operador Pagina 58