Datamax Mark III E-4206L Manual del operador Pagina 20
- Pagina / 92
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
14 Chapter 2 – Printer Setup
2.3.4 Loading Media with the Cutter Option
Load media for cutting (if the printer is equipped with the option) as follows:
1) Load media as described in Section 2.3, (steps 1-3).
2) Route the media through the opening in the Cutter.
312
Cutter
Media
3) If using Thermal Transfer media (ribbon) proceed to Section 2.4 Loading Ribbon. Otherwise close
the printer’s Cover and press downward until latched.
4) Press the button to advance the media (if the Fault Light is lit, see Section 3.7.). The printer
will now cut each label as it exits from the printer.
7) The printer will now peel each label and present it to the operator for removal.
If the printer is equipped with the Present Sensor Option, the indicator light will flash orange and the
next label will not feed/print until the previous label is removed.
The printer is factory set to use gap media. If using another media type (for example, continuous
media), printer setup must be reconfigured; see Section 3.4
.
- Operator’s Manual 1
- Copyright Information 3
- Limitation of Liability 3
- All rights reserved 4
- Additional Requirements 7
- Kensington Security Slot 8
- Power Supply 9
- AC Power Cord 9
- Power Jack 9
- Electrical Outlet 9
- Part # 32-2483-01 10
- Part # 32-2301-01 10
- Chapter 2 – Printer Setup 5 11
- 2.2.3 USB Connection 11
- 6 Chapter 2 – Printer Setup 12
- Chapter 2 – Printer Setup 7 13
- 8 Chapter 2 – Printer Setup 14
- (Pro+ models only) 16
- Cover Release Latch 16
- Media Chute Guides 17
- Media Hangers 17
- External Media Guide 17
- Hanger Lock 17
- External Media Slot 18
- Media Guides 18
- External Media Supply 18
- Media Backing 19
- Peeler Door 19
- Platen Roller 19
- Peel Bar 19
- Peel Roller 19
- Media Hanger 21
- Core Hanger 21
- Not in use Position 21
- C.S.I Coated Side In Ribbon 22
- to advance 24
- Core Adapter 25
- Ribbon Roll 25
- Ribbon Core 25
- Green/Orange Status LED 27
- Red Error LED 27
- Graphic Display 27
- Directional Arrow Buttons 27
- Multi-function Button 27
- Time/Date 28
- Printer Mode 28
- Programmable Marquee 28
- 3.3.3 Menu Mode 29
- Important Notes: 34
- 3.7.1 Quick Calibration 35
- 3.7.2 Manual Calibration 36
- button, set the 38
- button, increment the 38
- 18 174 42 9 41
- Chapter 4 – Menu System 37 43
- 38 Chapter 4 – Menu System 44
- Column Offset 47
- Cotton Swab with Solvent 60
- Printhead 60
- Cleaning Card Procedure 61
- Cleaning Film Procedure 61
- Ribbon Handler 62
- Gap or Notch Indicator 63
- Reflective (Mark) Indicator 63
- Bottom AMS Sensor 63
- Top AMS Sensor 63
- Printhead Assembly Tabs 64
- Printhead Carrier 64
- Printhead Shield Tabs 64
- Printhead Shield 65
- Printhead Screw 65
- Printhead Cable 65
- Platen Roller Tabs 66
- Platen Roller Assembly 66
- Mechanical 73
- Printing 73
- Media / Ribbon 74
- Communications 74
- Embedded Bar Codes 74
- button 77
- • Microsoft 87
Relacionado con productos y manuales para Impresoras De Etiquetas Datamax Mark III E-4206L
(40 paginas)
(4 paginas)Casio PX-735 manuály
Uživatelské manuály a uživatelské příručky pro Hudební nástroje Casio PX-735.
Poskytujeme 1 manuály pdf Casio PX-735 ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentarios a estos manuales