Datamax I-Class Manual del operador descargar pdf (Pagina 109)

I-Class 99

Printing (continued)

Maximum Print Width: 4.10” (104.0 mm): I-4206, I-4208, I-4212

4.16” (105.7 mm): I-4308

4.10” (104.0 mm): I-4406

4.16” (105.7 mm): I-4604

Print Length Range:

with cutter:

with peel & present:

.25”- 99” (6.4 - 2514.6 mm): I-4206, I-4208, I-4212, I-4308

.25”- 84” (6.4 - 2133.6 mm): I-4406

.25”- 55” (6.4 - 1397 mm): I-4604

1.25”- 99” (31.8 - 2514.6 mm): I-4206,I-4208, I-4212, I-4308

1.25” - 84” (31.8 - 2133.6 mm): I-4406

1.25” - 55” (31.8 - 1397 mm): I-4604

1.50” - 99” (38 – 2514.6 mm): I-4206, I-4208, I-4212, I-4308

1.50” - 84” (38 – 2133.6 mm): I-4406

1.50” - 55” (38 – 1397 mm): I-4604

Print Justification: Left

Flash Memory: 1 MB: I-4206, I-4208

2 MB: I-4212, I-4308, I-4406, I-4604

SDRAM Memory: 8 MB: I-4206, I-4208

16 MB: I-4212, I-4308, I-4406, I-4604

Media Types: Roll-Fed, Die-Cut, Continuous, and Fan-Fold. Flat on the

printable side with no more than .0007” (.018 mm) protrusions

on the opposite side.

Media Roll Capacity: 8” (203 mm) outer diameter, wound out labels only

Media Core: 1.5” or 3.0” (38 mm or 76.2 mm) inner diameter

Ribbon Core:

1.010” .006” (25.6 mm .2 mm) inner diameter. Core not to

protrude beyond ribbon edge.

Ribbon Width Range:

1.0” – 4.5” (25.4 mm – 114.3 mm), where Coated Side In and

Coated Side Out ribbon is NOT interchangeable and is specified

by the Thermal Transfer option type; also, width should

slightly exceed that of the media and backing, if any, to

protect the printhead.

Ribbon Length: 1968 feet (600 meters) maximum

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 131 132

Sin comentarios

Datamax I-Class Manual del operador Pagina 109