Datamax I-Class Manual del operador Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
54 I-Class
Diagnostics (continued)
Menu Item Details
LOOPBACK
Not Supported
PRINT SIGNAL INFO
Prints signal names, pin assignments, settings, and
current states for reference.
GPIO SIGNAL INFO
WED 11:04AM 24MAR2003
CARD ID#1
OUTPUT SIGNALS
END OF PRINT
PIN# 6
LOW PULSE
CURRENT LEVEL 1
RIBBON LOW
PIN# 5
ACTIVE LOW
CURRENT LEVEL 1
SERVICE REQUIRED
PIN# 4
ACTIVE LOW
CURRENT LEVEL 0
MEDIA OUT
PIN# 3
ACTIVE LOW
CURRENT LEVEL 1
RIBBON OUT
PIN# 2
ACTIVE LOW
CURRENT LEVEL 1
INPUT SIGNALS
START OF PRINT
PIN# 8
ACTIVE HIGH
CURRENT LEVEL 0
BACKUP LABEL
PIN# 7
DISABLED
CURRENT LEVEL 0
TEST SCANNER
Tests the Linear Scanner, where:
ALIGNMENT TEST
Reads a bar code then displays the decoded data, the
code type and scan count, repeating.
SCAN TEST
Reads a bar code then displays the decoded data, the
code type and scan count, non-repeating.
TEST RFID
Tests RFID, where:
TAG DATA
Reads the data encoded on the RFID chip.
DEVICE VERSION
Displays the type and version of the encoding device.
TAG ID – HF ONLY
Reads and displays the High Frequency Tag ID number.
PRINT TEST RATE (min)
Allows a label-to-label delay (0 - 120 minutes) when
printing test label batches, where:
000 (0 - 120)
Is the selected delay interval, in minutes.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 131 132

Comentarios a estos manuales

Sin comentarios