Datamax I-Class Manual del operador descargar pdf (Pagina 71)

I-Class 61

Prompts and Condition Messages (continued)

Displayed Message Description Action

SYSTEM INITIALIZING

The power switch has been turned

ON or a reset has occurred.

No action is required.

Wait briefly while the

process completes.

SYSTEM RESET

IN PROGRESS

A reset has occurred.

No action is required.

Wait briefly while the

process completes.

UNCALIBRATED The Media Sensor is not calibrated.

Perform calibration; see

Section 5.2.

WAITING FOR DATA

The SOP signal has been received,

but the printer awaits label data.

Send data from the

host.

WAITING FOR SIGNAL The printer awaits a SOP signal.

Send the SOP signal

from the applicator to

the GPIO port.

XXXX OF XXXX

PRINTING

A print job is in process, as

indicated by the batch total and

remaining label count.

No action is required.

5.2 Calibration

Calibration ensures label detection. Perform calibration when the UNCALIBRATED is

displayed. Two different methods, Standard and Advanced Entry, are available to calibrate

the printer.

5.2.1 Standard Calibration

Standard Calibration, appropriate for most media types, is a method that allows visual

access to the media sensor for positioning. Displayed sensor readings can also be used to

indicate the best position over the media – helpful when using small, position-critical TOF

notches or marks.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 131 132

Sin comentarios

Datamax I-Class Manual del operador Pagina 71